Bitium Tank Emulsion / Bituminous Product Transport Tank 12 ton.
The idea is not complete. Heating part is not complete where diesel heaters need to be reviewed. Electronics also need to be reviewed.
Not used!
The idea is currently overblown.
Supplier specification:
- Cylindrical section adapted for truck frame
- Support frame made in UPN
- Tank capacity 12000 liters
- Made in carbon chair S 235 JR
- The tank is placed on a metal frame according to your drawing with a container lock in each corner.
- Scoop shot in tank.
- Insulation with rockwool thickness 100mm (compressed 80mm) Density 100kg per cubic meter, in accordance with certification requirements. In the event of a fire, the tank with insulation does not emit toxic gases.
- The tank is covered with stainless steel Inox thickness 10/10
HEATING:
o Automatic heating 230 V., made by Riello
o The flame tube in the tank for heating is connected directly to the burner
o Exhaust pipe from the tank when heated
- Temperature indication by bimetallic thermometer
- Level measurement and external temperature indication mounted adjacent to the burner for control. Warning indicator connected to maximum level sensor.
- Level sensor "BESTA" with magnetic contact for control of minimum level for switching off the heater when the product level is lower than the flame tube.
- Level sensor "BESTA" with magnetic contact for checking the maximum level for switching off the heater when the maximum filling level has been reached.
- Walk-in table for access to the manhole.
- Ladder to reach walkway.
- Male hatch diameter 500mm with ventilation valve.
- Connection for emptying the product using a separate pump (pump not included).
- Control panel mounted on the side of the tank.
o Main switch
o Thermostat and indication of product temperature
o Burner control
o Vertical shaft control mixer controls
o "Block burner" controls
o Control, control and safety thermostat for switching off the burner
o Emergency stop of burner at low level of product.
o Alarm at maximum level in tank
o Socket for connecting an external electronic component
- Mixer with vertical axis for mixing of the emulsion. Mixer is connected to electric motor gear
- Mounting kit included
NOTE! Unfortunately, the bankruptcy estate makes no guarantees on the above specification!