Seller's description:
A complete plant for the production of pellets from the forest 'clearing / thinning timber. Gives a very good value development of dry trees with a factor of about 1-20 times. Capacity about 185kg / hour
FLOW: Wood-Chip-Dry-Intermediate-Pellet-Press-Pellets
A: Production in the flow starts with a diesel-powered former sawmill chipper Brand: Sjölins with feed opening 40x70cm and Scania 6cyl, engine DS 11 R 01A.
B: Screw conveyor up to a Hack from JF with electric drive which ensures that no long chips are left in the chips.
C: Intermediate bearing in a JF station wagon with photocell stop for feed to the screw.
D: Screw for pellet-heated, rotating chip dryer cylinder with fan approx. 3m diameter and approx. 6 m long
E: Screw up to a rotating moisture leveling container approx. 3 meters dia o 6m long.
F: Screw for intermediate bearing / press bearing approx. 5m3
G: Screw for pellet press as with a die, presses chips to standard size electric motor. Extra matrix included.
H: conveyor belt with cooling fan with end at the top with a dust separator, Now the pellets are ready!
The entire facility is housed in a hall of about 10x 20m thanks to the material going back and forth in the factory. Most are self-built and work with photocells, frequency converters etc. for an automated operation.
The system, screws etc. take care of themselves to a large extent without starting / stopping belts and screws manually.
Current trusses machine hall frame not included! The material cost for the construction has totaled approximately SEK 800,000.
NOTE! If there are parts of the factory the buyer does not want, they can be left behind.
If there is interest in certain equipment, email administrators with bids for these and any resale can take place if the item is not sold in its entirety.