This 100 liter solar collector is specially designed for those of you who have your holiday home in the forest, in the countryside or perhaps out in the archipelago. This solution is a big advantage as it does not require any electricity but still works if there is access to sun and water. Imagine having access to hot water in the shower and or when doing the dishes, surely that's good? The solar collector tubes in the collector are very sensitive and actually work even when it is cloudy.
Another area of use
This solar collector also works great if you want to give your pool some extra heat. Here you can count with a simple rule of thumb: calculate a hundred-liter solar collector tank per 10 cubic meters of water, so for example two connected 100 liter solar collectors like this are enough to heat a pool of 20 cubic meters of water.
The plant works like this
This 100 liter solar collector works in a direct flow of water without pressure, the solar heater is composed of direct flow collector and a non-pressurized tank. When you drain the hot water for, for example, the shower, cold water will be added to the tank at the same time, and automatically stopped when the tank is full. This way the tank will always stay full of water.
The heat collection tube is made as a vacuum tube and in this there is an aluminum fin. The sun's rays heat and are collected by the selective absorption coating on the fin. Via transmission to the conduit from the aluminum fin, the conduit will supply energy to the tank to gradually increase the water temperature of the entire tank.
Benefits
- The heating pipe delivers heat in a safe way,
- The solar collector can work at low temperature with fast speed and high efficiency.
- Because the heating pipe can work at a low temperature, the pipe is protected from frost and breakage.
- The heating pipe is not filled with water, which prevents pipe breakage
- The pipe can work at very low temperature because no water inside but cannot withstand prolonged frost
- The solar water heater can work well even if a pipe breaks
- The water tank is filled and stopped automatically, which means you never have to fill the water by hand.
Technical preferences
Outer tank: Drawbench stainless steel 0.4 mm
Inner tank: Stainless steel, 304-2B 0.5 mm
Number of vacuum tubes: 15 pieces
Capacity water tank: 100 litres
Vacuum pipe dimensions: 47-1500 mm CU-SS/AL
Absorbency 93%
Scaffolding/frame: Galvanized steel 1.5 mm
Frame tilt angle: 45 degrees
Pressure range: 0.05 MPa
5L assistant tank for balancing the amount of water
of rubber is included
NOTE SHIPPING IS INCLUDED (SWEDEN) IN THESE ITEMS AND IS AUTOMATICALLY SENT OUT TO ALL CUSTOMERS WITHIN APPROXIMATELY 2 WEEKS OF FULL PAYMENT! KEEP YOUR ADDRESS DETAILS UPDATED AT PS AUCTION!

