Auction Closes

Friday, 2024-01-19 10:35 UTC+01:00

Auction ended

Add to calendar
Add to Google Calendar Add to Apple Calendar Add to Outlook

You can add a reminder in your calendar before the auction ends

Have any questions about the item?

Customer Support

info@ps.se +46771101100

CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder

  • 1078381
  • 13526 Tyresö

Ended

  • 1078381-1 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-2 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-3 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-4 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-5 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-6 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-7 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-8 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-9 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-10 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-11 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-12 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-13 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-14 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-15 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-16 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-17 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-18 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-19 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-20 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-21 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-22 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-23 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-24 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-25 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-26 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-27 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-28 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-29 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-30 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-31 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-32 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-33 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-34 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-35 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-36 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-37 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-38 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-39 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-40 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder
  • 1078381-41 CNC lathe TRAUB TNC 30 TGY incl. FMB Turbo 3-36 Bar feeder

A sustainable action

The climate footprint of a corresponding newly produced item is approx 64009kg CO2 Click here to find out more

Info Shipping Exhibition Pick up Auction type
Brand TRAUBE
Model TNC 30 TGY
Year of manufacture 1998
Accessories Stångmatare
Item condition Normal

Year model 1998
12 places in each revolver so a total of 24
Powered tools.

Specification: (Subject to typographical errors)

- max. rod Ø: 30 [mm]

- max. chuck Ø: 150 [mm]

- main spindle motor power: 7.5 [kW]

- underspindle power: 5.5 [kW]

- with fixed main head

- with mobile tail bearing

- synchronized counterspindle

- max. transverse stroke X1, X2 : 120, 110 [mm]

- max. longitudinal stroke Z1, Z2: 330 [mm]

- speed: 950 - 7000 [rpm]

- Max. turning length: [mm] 450

- Bar capacity: [mm] 42

Oil cooler with separate container

Control system TX 8F

Various tools etc. included, see pictures

All covers are available

Weight 4.5t

FMB turbo 3-36

Model year 2020

Special magazine intended for this TRAUB TNC 30 TGY

220cm maximum pole length

Rod length - 2200 mm

Bar diameter - 3 - 38 mm

Load capacity - 230 mm

Remaining piece length (max) - 450 mm

Charging time (approx) - 20 s

Feed speed - 0-1000 mm/s

Return speed - 0-2000 mm/s

Power requirement - 2.0 kW

Compressed air connection - 0.6 / 6 bar MPa

Weight without oil - 550 kg

 

ATTENTION! The object needs to be loaded by crane by the buyer, the seller ensures that the object is outside ready for lifting

 

Important info

All bids are binding and the service fee is charged on all items. Any deviations from equivalent second-hand goods are described under the section Remarks in the description of the Item and thus PS is not responsible for the deviation.
The item is NOT TESTED by the auction firm unless otherwise specified in the object description. The object description is done with the best of our knowledge but not binding in detail.
PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description.

Shipping not available on this item

This object can possibly be shown against interest

Contact Christopher Nygren via email below to see if there is an opportunity for a viewing

christopher.nygren@ps.se

Delivery takes place by agreement 135 26 Tyresö, exact address is available on the invoice after winning the auction, the buyer needs to lift the machine onto a truck with a crane

Payment must be made and visible to PS Auction.

The items will be released upon receipt of a digital invoice. If a representative collects, there must be a power of attorney and a photocopy of the buyer's driver's license.

Other questions info@ps.se

Important info

Payment must have been received by us before you can pick up the goods, so pay in time. 
Invoice copy and proof of payment must be brought to the pick up. The buyer shall at the appointed time arrange collection, loading, disassembly / packing of the item.

Regarding items in PS premises that have not been picked up on time PS have the right to charge 2500 SEK excl VAT / week per item

PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description.

Disposal

Disposal means that a client has goods that they wish to sell. For example, it may be a supply / storage that is needs to be emptied, or that the company has restructured and does not need office space / equipment / etc anymore. This differs from bankruptcy since it's a voluntary sale.

Three ways to bid

Classic - The bidding is fully handled by the system. The goal is to always place a bid right above the competing bidders but no more than that. The bidding service automatically places bids in your name up to your maxbid. The minimum bidding intervalls vary between items.


Comfort - Works like the Classic bid but with the difference that the system takes the current bid and reserve price into consideration in the cases there is one. A good choice if you know you’ll bid high but don’t want to get caught up in bidding below the reserve price.


Active - The bid will be the one you place and is handled manually. Good to use if you want to place a large bid from the start and take home the whole auction, but requires attention from the bidders part in case other bidder might have maxbids in place.


You can read more about the bidding function here.

Share via E-mail

Service fee

Service fee is the fee that PS collects from the bidder for the use of our bidding service

No reserve price

There is no reserve price for this item. That means that the highest bid will always be a winning bid.

Reserve price not reached

The bid has not yet reached the reserve price which is the price that the seller is willing to sell the item for. If the auction ends without the reserve price being reached, one of the following will happen. 1) The seller accepts the bid and an invoice is sent to the bidder within 3 working days. 2) A representative from PS Auction calls the bidder to negotiate the price within 3 working days. 3) The seller does NOT accept the bid. The item is either not sold at all or re-auctioned.

Reserve price reached

The bid has reached the reservation price the seller is willing to sell the item for. Unless something unforeseen happens, the bidder will receive an invoice for the item after the auction has ended.