With this hot tub you and the family get many lovely hot baths and it is bigger than you think. It can accommodate 4–6 people – family with good friends.
Its efficient external wood stove provides bathing space in the entire hot tub and quickly heats up the bathing water in normally just over two to three hours, depending on the season. The hot tub is insulated and assembled. The through-colored gray melange plastic insert, which is made of durable homogeneous polyethylene plastic, goes up and protects the outer panel end wood and wraps around the entire hot tub, providing a comfortable uniform edge in the same durable material. Great comfort is achieved with the back tilted just right and the gently rounded front edge of the seat with a decent amount of legroom below. Simple and quick installation.
The material of the plastic insert provides a hygienic bathtub with a smooth and dirt-repellent surface that is quick and easy to clean. The material is problem-free and durable, there is no risk of color bleeding, blisters or the plastic layering! The plastic is UV protected, withstands all climates, heat up to +130˚C and cold down to -50 °C. The material is age-resistant - with an estimated service life of more than 40 years and does not dry out. Environmentally friendly – Fully recyclable plastic.
The hot tub is cleaned easily and environmentally friendly with Kirami TubSpray and e.g. a mushroom on shaft and water hose. The plastic can even be high-pressure washed.
The hot tub has a thick strong insulating foundation under the plastic insert of EPS, under the entire floor approx. 20 cm and all the way up under the seat all around which stops the ground chill. The underside has a smooth sheet of durable ABS plastic and no organic materials come into contact with the ground. The hot tub is easily placed on a flat, completely smooth and stable surface, e.g. a bed of gravel/crushed or a terrace floor. Keep in mind that the surface must handle the total weight of the hot tub with water of approx. 1700 kg.
The exterior has an outer panel of black stained spruce in a style+pure black tone with the fine natural grain of the wood. The lower end wood meets a bit above the ground and is protected by the black durable ABS plastic base plate that wraps around the hot tub at the ground like a stylish plinth. This outer panel is close to maintenance free. A simple quick ironing every five years with new noble stain normally keeps the hot tub looking like new.
The hot tub can be equipped with a treatment plant if you want to avoid changing the bath water often and/or if you are short of water. We have different purification systems from Kirami to offer, depending on how long you want to be able to use the same water.
More information about this hot tub and the different purification systems can be found in the following appendices.
Its low weight of approx. 90 kg without the wood stove makes it easy to carry, normally 3-4 people carry it. Hot tub incl. wood stove and chimney weigh approx. 130 kg.
Product features:
• Outer diameter: 170 cm
• Water volume: 1450 litres
• Accommodates 4-6 people
• Height: 110 cm
• Depth: 91 cm
• Cult wood stove, 36/22 kw (Gross/net output) with chimney package
• Large hot tub with comfortable seat all around, more spacious than you think!
• For 4-6 people, Ø170 cm, water volume: 1450 litres
• The hot tub is assembled and insulated like all Kirami hot tubs
• External wood stove CULT 36 kW for comfortable, fast heating
• Solid plastic insert of homogenous colored polyethylene plastic.
