Submersible pump Yato YT-85333.
The 3-in-1 submersible pump for clean and dirty water is one of the most versatile and efficient pumps.
Designed to pump and circulate clean and dirty water from rainwater tanks and wells. It can be used in households and farms, allotments, construction sites to pump water out of pools, ponds, basements and excavations.
Can pump water practically down to the level of 1 mm! -without putting on either of the two bases. This allows you to effectively drain flooded basements, remove water from swimming pools, ponds, rain barrels and any flooded areas that need to be drained, etc.
The distinguishing features of this type of pump are:
replaceable pump bases: dirty water pump base – capable of pumping debris smaller than 30mm; p pumping clean water -can pump debris less than 5 mm; work through pump bases – pump water down to 1mm!
automatic operation (switch active) or continuous (switch locked vertically on the handle)
compact design, ergonomics and light product
very good performance: flow for a 900 W pump = 18 m3/h (with the head that in any pump reduces the flow)
motor overload protection
rust-proof rotor shaft, maintenance-free bearing and tight housing ensure trouble-free use
Additional information:
automatic float switch that reacts to changing water level
water-cooled motor with thermal switch to prevent overheating
solid housing made of impact- and corrosion-resistant plastic
max. immersion depth: 7 m
maximum water temperature: 35°C
max. dirt diameter: 30 mm
the length of the rubber hose. 10 m
Including:
2 bases – for clean and dirty water
1.5" (38mm)