Portal milling machine 9500x3600x2000mm with accessories

1427823
43439 Kungsbacka

Shipping not available
Disposal

Ended

A sustainable action

The climate footprint of a corresponding newly produced item is approx 15060kg CO₂ Click here to find out more

Info Shipping Exhibition Pick up Auction type

Portal milling machine with accessories

Five-axis portal milling machine intended for milling soft materials such as polystyrene, wood, plaster, Ureol blocks and Epoxy paste. The machine is designed for 3-axis milling and 3+2 indexed machining.

Specifications

Five-axis gantry milling machine
Range of operation:
- X: approx. 9,500 mm, max. 20 m/min
- Y: approx. 3,600 mm, max. 20 m/min
- Z: approx. 2,000 mm, max. 6 m/min
- B: approximately ±95°
- C: approximately ±120°
Milling: 3-axis and 3+2 indexed
Precision within the working volume: approximately 0.5 mm

Construction

X-axis with track on steel beam, mounted on concrete foundation
INA track rollers with mounted rack
Y and Z section with carbon fiber beams and Z-gantry
Aluminum housing for carriages and drive

Spider

HSD ES929L H4PNL
Power: 12 kW
Chuck: HSK 63F
Number of chucks: 4 pcs
Max speed: 24,000 rpm
Water-cooled
Separate compressor cooler

Drive

X, Y and Z:
- Servomotors Bosch Framed MKD071B-061-KG1
- Planetary gears Wittenstein Alpha SP 075A-MF1-10 (X/Y) and SP075A-MF2-28 (Z)
- Inverted HTD 8M rack and pinion drive
B:
- Servo motor Bosch Frame MKD025B-144-KG1
- Harmonicdrive hollow shaft gear unit CPU 32A 100:1
C:
- Harmonic drive hollow shaft servo FHA 40C with controller HA-655-4

Control and electronics

Servo controller for X, Y, Z and B: Indramat Ecodrive DKC01.1-040-7-FW
Power supply 24V DC: Phoenix Contact Quint Power 30A
Mesa 3X20+6I68 controller board
Mesa 7I33TA Quad Analog servo interface x3
Mesa 7I37TA Isolated I/O Card x3
PC with Linux CNC control system and UPS
Cooling fan for control cabinet

Measure

Table: approximately 2520 x 1625 mm
Height: approximately 1050 mm
Length x-rails: 12 m, 2 pcs (each rail joined in the middle, i.e. 6m)

Accessories / other information

Various spare parts for drive
Various milling tools and chucks
Table-mounted holder for HSK F63 chuck
If the buyer wants, they can also get the concrete blocks for the rail that the cutter rides on.

Delivery/removal: The machine needs to be dismantled when it is picked up and needs to be taken out of the premises and loaded by the buyer. Delivery is booked immediately with the administrator after payment has been received.

Important info

All bids are binding and the service fee is charged on all items. Any deviations from equivalent second-hand goods are described under the section Remarks in the description of the Item and thus PS is not responsible for the deviation.
The item is NOT TESTED by the auction firm unless otherwise specified in the object description. The object description is done with the best of our knowledge but not binding in detail.
PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description.

Shipping not available on this item

No display. For specific questions about the object, email the administrator anna.marberg@ps.se

Delivery of objects Kungsbacka booked delivery weekdays 9 am -3 pm

Book with the administrator by email after the auction has ended in consultation with the seller. Before contacting the administrator, make sure you have received the payment confirmation.

Purchased items can only be picked up after full payment has been registered in our system . Payment must be made within 7 days of the auction ending. Pick up no later than Friday 12/6

Address: Obtained by administrator

Booking a pick-up:
When the payment is completed and visible to us, please contact the responsible administrator by email.

When picking up, you will need:

Digital invoice (present upon delivery)
If an agent collects the item: power of attorney and copy of the buyer's ID/driver's license
That you have received payment confirmation so we can see that payment has been made.

Important:
Before you contact the booking manager, ensure that your invoice has been paid and that the payment has been registered with us.

For other questions, please contact our customer service:
📧 info@ps.se | ☎️ +4677110110

Important info

Payment must have been received by us before you can pick up the goods, so pay in time.
Please bring a copy of the invoice to the pick up. The buyer shall at the appointed time arrange collection, loading, disassembly / packing of the item.

Regarding items in PS premises that have not been picked up on time PS have the right to charge 2500 SEK excl VAT / week per item

PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description.

Disposal

Disposal means that a client has goods that they wish to sell. For example, it may be a supply / storage that is needs to be emptied, or that the company has restructured and does not need office space / equipment / etc anymore. This differs from bankruptcy since it's a voluntary sale.