AWST 12 kW
The package includes a service ticket (linked to the product's serial number) that entitles the installer to technical support via Energy Save!
120316 AWST6/15-R32-M-V8
Air/Water 6–15 kW, V6 Touch display, 250 l tank, 400/230V, 3-phase, 16/25A, indoor unit, white
120319 AW12-R32-M-V8
Air/Water 12 kW R32 Monoblock outdoor unit, 230V/1-phase/16A
120711 OUS Gen 2.0
Ground stand outdoor unit, light grey
Article SP260096
Battery Heatstar
Object description
Quiet and efficient 12 kW air/water heat pump with 250 liter hot water tank and ground stand.
The AW-R32-M heat pump series from Swedish Energy Save uses modern technology for high efficiency and low environmental impact. The units are designed for Nordic climates and have low noise levels thanks to specially designed fans and a soundproof compressor compartment.
The “M” in the model name stands for Monoblock. This means that the refrigerant system is a factory-sealed circuit in the outdoor unit and that the connection between the indoor and outdoor units is hydraulic. Therefore, no refrigerant handling is required on site.
The AWST version is an All-in-One solution for heating, cooling and domestic hot water. The indoor unit has an integrated 250-liter tank for domestic hot water as well as a diverter valve, 3–9 kW immersion heater and expansion vessel.
The outdoor unit has a frost protection function to reduce the risk of frost damage in the event of any operational disruptions.
Features
- Internet connection via LAN cable
- Heating, cooling and domestic hot water
- Possibility to control two heating/cooling circuits
- Night mode
- Possibility to control additional heat sources
- Dual temperature settings for hot water
- Holiday mode
- Floor hardening function
- Anti-legionella function
Technical data
- Control panel: Touch display
- Energy class: A+++ / A++
- SCOP: 4.71
- Heating capacity: 11.60 kW
- COP: 4.71
- Max supply temperature in heating mode: 58 °C
- Operating range: –25°C to +65°C
- Sound power level: 58 dB(A)
- Tank: 250 liters for domestic hot water
- Tank type: Stainless steel SUS316
- Domestic hot water profile: L
- Domestic hot water class: A+
- Refrigerant: R32
Important information upon delivery
The buyer is responsible for checking the goods upon delivery.
If the packaging or the product has visible damage, this must be reported directly to the driver/forwarder before the delivery is acknowledged . The damage must also be documented with clear photographs of both the packaging and the product.
Any transport damage must then be reported to PS Auction as soon as possible together with pictures and information about the damage.
In order for transport damage to be handled and any compensation or replacement goods to be available, the damage must have been noted by the freight forwarder at the time of delivery and documented with photographs.
Therefore, do not acknowledge a visibly damaged delivery without first notifying and documenting the damage.
Note about buffer tank
Buffer tank is not included in this package.
Depending on how the existing heating system is structured, a buffer tank may be recommended to ensure sufficient water volume and stable flow through the heat pump.
This may be relevant, for example, for smaller or throttled radiator circuits, underfloor heating systems with shunt groups, multiple thermostatic valves or systems with varying flow.
The need for a buffer tank should be assessed based on the current installation together with the installer.













