Solar collector 150L for hot water
The solar collector requires no power but works if there is access to sun and water.
The solar collector's vaccine tube has a thin coating that captures the sun's rays.
Thanks to the fact that hot and cold water has different densities, you get an automatic circulation, where the hot water is moved upwards and the cold water is moved downwards. This automatic circulation thus heats the water in the tank.
On top of the large tank there is a small tank of 5L which helps to keep the water level in the large water tank constant, which in turn means that you get an even temperature.
The heat efficiency under strong sun (800W / m2) gives 2.45 kwh / m2.
The temperature in the tank can rise 8 degrees / hour up to 95 degrees and retain the heat for about 72 hours.
This solar collector is made for use during the summer and when the air temperature is + degrees.
The solar collector should be emptied during the winter
Tank 150l
Drawbench Silver steel 0.4 mm
Inner tank 304-2B 0.5mm
Vaccine tube: 15pcs
Height: 1800mm
Pipe diameter: 58mm Cu-SS / Al
Pressure: 0.05MPa
Included 5l help tank
Frame: Galvanized steel 1mm
Angle: 45 °
Area: 1,92m2



