Stone crusher Sandvik Crawlmaster CM 1208 F –99 The frame of the stone crusher was manufactured in 1999, the crusher unit in 2003 and the engine in 2014.
Kross installed the engine in 2017.
The machine is electrically powered with its own generator
Sold on behalf of insurance companies.
Excerpt from the damage report:
The frame Deformations and dents were noted along the entire length of the long side the machine landed on at the time of the accident. The damage was noted on the outside of the frame, the structure of the frame itself appeared to be straight. Two bolts at the attachment of the conveyor belt had come off, which resulted in the conveyor belt tilting down to the ground on the side the machine landed on. Engine and generator were located in an engine house in the center of the frame. Damage in the form of deformation and dents was noted on the entire machine housing. A motor mount was severely deformed and most of the buttons on the electrical cabinet behind the motor were worn away or sprained. The crusher unit had tipped off the frame during the accident, which is normal as it is not firmly anchored in the frame. Dents and deformations as well as scratches were noted on the vessel of the crusher on the side that landed on the ground, on which there were also traces of soil and mud. 5 electrical cables were cut on the side the crusher did not land on. There was no visible damage to the crusher shaft. The feeder only had visible damage in the form of minor dents and deformations on the vessel. During the visit, the operator had placed some loose parts in the feeder's vessel. These parts were not damaged but only placed there for temporary storage. The crusher frame was manufactured in 1999, the crusher unit in 2003 and the engine in 2014. According to the Operator, the engine was installed in 2017.
