TC Powertec SLC -MPPT 30 A Solar Charge Controller
TC Powertec is one of the leading manufacturers of regulators in the world. We have been working as a general agent for this supplier for decades. This is TC Powertec's largest model SLC-MPPT 2440 which is an regulator beyond the ordinary! The advantage of this controller is that in addition to being stylish, it also optimizes the efficiency of your system. Otherwise it is usually only possible if you place more solar panels. We stock this SLC -MPPT Solar Charge Controller in three different sizes MPPT series. All have an aluminum frame, which means that it can withstand tough grips.
Description
The SLC -MPPT Solar Charge Controller acts as the brain in the PV system to coordinate the work with the solar panel, battery and load. It can improve the use of solar panels and protect the battery.
Key features
Tracking efficiency not less than 99.5%
Maximum yield efficiency reaches 97%
SLC -MPPT Solar Charge Controller are self-identified (12 Volt and / or 24 Volt find it yourself!)
Compatible with most different types of batteries: such as Seal, GEL, Flooded, LiFePO4 and Lithium battery and so on
You have the option to control the SLC -MPPT Solar Charge Controller remotely if you want when communication mode is provided such as Bluetooth, wifi and RS485 port
Different load control modes: general mode, light control mode, dual time mode and pure charging mode
Preferences:
Voltage: 12 V / 24 V Automatic
Maximum charge: 30 Amps
Max Volt: 100 V
Battery types: USER, FLOODED, AGM, GEL, LIFEPO4 and Lithium
Charge equalization: SLD: 14.6 V, GEL: zero, FLD: 14.8 V
Absorption charge: SLD 14.4 V, GEL: 14.2 V
Floating charge after full charge: GEL, SLD, FLD: 13.8 V
Disconnection at low power: GEL, SLD, FLD: 10.8 V
Low voltage feedback: GEL, SLD, FLD: 12.6 V
No charge consumption: ≤0.40 mA
Switch-off at high Voltage: 16 V
Equalized charging time: 2 hours
Absorption charging time: 2 hours
Voltage charge lamp: 5 V
Temperature compensation:: - 4 mV / cell / * C
Charging loop Voltage drop: ≤0.29 V
Discharge loop Voltage drop: ≤0.16V
LCD Screen temperature range: -20 to + 70 degrees Celsius
Working temperature best within: -20 to + 55 degrees Celsius
Storage temperature: -30 to + 80 degrees Celsius
Humidity: 0-9 no condensation
Communication setting: RS485, RJ45 POST
(099324)
