Battery charger F300 14.6V, 10 Ah intended for Lithium batteries
Quality chargers designed to work year after year, giving you trouble-free charging of what you need when you need it most. It is suitable for all types of equipment and tools that use rechargeable batteries as a power source and is intended for and can be advantageously used for charging all forms of Lithium batteries. These are loaded quickly and safely. The charger is very easy to use. Just connect the charger's wires to the battery's terminals and connect the plug to the wall outlet. The status of charging is easily monitored as red and green charging lights indicate.
Suitable for charging batteries
Cars
Boats
Electric bikes and scooters
Robots
Electric battery powered toys
Industrial battery powered robots
Other practical power tools
Preferences and tests.
Input voltage: 200-240V
Input frequency: 50/60Hz
Max input current: When the input voltage is 200VAC, the maximum input current is 2.4A.
Surge current: <50A.
At an ambient temperature of 25 °C, when the output is classified as negative load, input the maximum wave at 220VAC cold start, the surge current is less than 50A.
Output power: Output voltage: 14.6V
Max. Charging current: 10A
Fan turn light current 1A
Max. Output power: 146W
Load characteristics:
No-load voltage: 14.6V
Line regulation: ±0.2V
Load rules: ±5%
Efficiency: When the input voltage is 220VAC and the maximum load is it
more than 90%
Undervoltage protection: When the input voltage is less than 180VAC, the charger has no function, but when the input voltage returns to normal strength, it can automatically return and charge again
Output Short Circuit Protection: The power supply will be restored automatically when the short circuit fault is removed.
Output overflow temperature protection: The power supply will automatically return to normal operation after the overflow temperature fault is removed
Output overvoltage: When the output voltage exceeds the speed voltage, the power supply will be protected and the power must be restored after troubleshooting.
Output low voltage protection: When the battery voltage is less than 11V, the charger is protected, the fault is cleared and the charger starts working again
Output protection for reverse connection: When the output terminal is reverse connected, the output fuse will blow, and the fuse can be replaced after the fault is removed to resume work.
Protection class: IP30 Indoor use
Working temperature: -40°C~+45°C
Storage temperature: -40°C ± 85°C
Safety and EMC requirements
high voltage
insulation test input-output: 1800Vac/60s ≤5mA
Insulation resistance input-outer shell: ≥100MΩ@500Vdc
Output-outer shell: ≥100MΩ@500Vdc Leakage current: <5mA
Certification authority: CE
Certification standards EN60950
Status description of the indicator lights
No-charge: Green lamp lights up normally
Normal charging: Red light is normally on
Fully charged: Green light is on normally
Dimensions: L 137 x W 90 x H 51 mm
Article number: 104674
